Ti Gr.9
The Gr.9 (TC2) alloy is a nearly α-type titanium alloy, which is often referred to as 'semi-TC4'. It has a higher temperature application range than Gr.1-4, making it suitable for processes such as argon arc welding, spot welding and seam welding.
Essential details
The Gr.9(TC2) alloy is a nearly α-type titanium alloy, usually called "semi-TC4". The application temperature is higher than that of Gr1-4. and it is suitable for argon arc welding, spot welding and seam welding. A near-α-type titanium alloy with medium strength and good plasticity, which contains 4% α-stable element Al and 1.5% β-stable element Mn. This alloy cannot be strengthened by heat treatment and is only used in the annealed state.
1.) Annealing: plates and plate parts: 660-710°C, 15-60min, air cooling or slower cooling; bars, forgings and pipes: 740-790°C, 1-2h, air cooling.
2.) Stress relief annealing, 545-585°C, 0.5-6h, air cooling or furnace cooling.
Gr.9(TC2) alloy has relatively satisfactory process plasticity, weldability and thermal stability. The long-term working temperature can reach 350°C, and the short-term working temperature is 750°C.
The plasticity of the process is good in the hot state, and complex parts can be made by hot stamping.
Application:
| Equivalent grades | • Ti Gr.9 • DIN 3.7195 • UNS R56320 • Ti 3Al-2.5V |
| Chemical Composition Reference | 0.03N-0.08C-0.015H-0.25Fe-0.15O-2.5~3.5AI-2~3V |
| Physical Property Reference | • Tensile Strength: 620Mpa • Yield Strength: 483 MPa • Elongation: 15% |
| Stock & Dimensions | Our warehouse has a large number of stock to provide you with a variety of products in different sizes, and can also customize the size according to your needs. • Bar: 0.5~600mm Diameter • Coil: 0.5~150mm Thick • Plate: 0.5~200mm Thick • Pipe: 6~630mm External Diameter; 0.5~40mm Wall Tick • Available in specific sizes |
| Product Forms | We provide you with a variety of product forms, including but not limited to: • Bar/Rod • Pipe/Tube • Coil/Strip • Plate/Sheet/Circle • Wire • Fitting (Flange, Elbow, Tee...) • Customize |
- Aviation industry
- Stamping
- Aircraft parts (accessories, engines, aircraft wings, etc.)
- Weldment
- Manufacturing
- Plate structural parts
- Catheter
